Sabra Metals, located in Amman, Jordan, has built a solid reputation as a reliable manufacturer and supplier of top-notch Tool and Die Steel P20 bars. Renowned for their precision and dependability, the company produces steel bars that adhere to the strict standards required for mold-making and die applications. Thanks to their advanced manufacturing techniques and thorough quality control measures, Sabra Metals guarantees consistent hardness, uniformity, and excellent machinability. Their products cater to various industries, including automotive, plastics, and metalworking, providing long-lasting performance even in challenging production settings. With a strong focus on customer satisfaction, Sabra Metals has become a go-to source for Tool and Die Steel solutions both locally and globally.
Tool and Die Steel P20 bars are generally made from a chromium-molybdenum alloyed steel, featuring a controlled carbon content of about 0.28–0.32%, along with approximately 1.5% chromium and 0.5% molybdenum. This specific composition strikes a perfect balance between hardness, toughness, and wear resistance. P20 steel bars are pre-hardened to a range of 28–32 HRC, which ensures they are easy to machine and maintain uniformity. They also exhibit good dimensional stability during heat treatment and polishing, along with strong resistance to cracking and deformation. These mechanical properties make P20 bars particularly well-suited for precision mold-making and die applications that demand repeated high-pressure use without sacrificing accuracy or surface quality.
| C % | Mn % | Si % | Cr % | Mo % |
| 0.40% | 1.00% | 0.40% | 1.20% | 0.35% |
| Properties | Metric |
| Hardness, Brinell (Typical) | 300 |
| Hardness, Rockwell C (Typical) | 30 |
| Tensile Strength, Ultimate | 965-1030 MPa |
| Tensile Strength, Yield | 827-862 MPa |
| Elongation At Break (In 50 Mm (2″)) | 20.00% |
| Compressive Strength | 862 MPa |
| Charpy Impact (V-Notch) | 27.1-33.9 J |
| Poisson’s Ratio | 0.27-0.30 |
| Elastic Modulus | 190-210 GPa |
| Country | USA | German | GB/T | JIS |
| Standard | ASTM A681 | DIN EN ISO 4957 | GB/T 1299 | |
| Grades | P20 | 1.2311 | 3Cr2Mo | PDS-3 |
| Properties | Conditions | ||
| T (°C) | Treatment | ||
| Thermal Expansion | 12.8 X 10-6/ºC | 20-425 | – |
When choosing P20 tool and die steel bars, consider machinability, toughness, hardness, heat treatment capabilities, corrosion resistance, application requirements, cost-effectiveness, and availability of suitable sizes for your specific needs.
Tool and die steel P20 bars are typically sized by their diameter and length, with common diameters ranging from 1 inch to 10 inches, and lengths ranging from 10 to 20 feet.
Tool and Die Steel P20 bars find extensive application in the production of plastic injection molds, die-casting dies, and stamping tools. Their consistent hardness and ability to achieve a polished finish make them perfect for molds that require precise shapes and smooth surfaces. Manufacturers in the automotive and consumer product sectors depend on P20 bars for components that experience repeated mechanical stress. Additionally, P20 steel bars are utilized for prototype molds, tooling blocks, and various manufacturing jigs.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Sabra Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Amman, Jordan
Copyright 2024 Sabra Metals. All rights reserved
